Solarpark in hügeliger Waldlandschaft bei Sonnenuntergang, im Vordergrund zwei schwarze Solarstecker mit den Beschriftungen „HIS ALU“ und „HIS CU“

Reducing copper price risk: how HISkon+ ALU makes DC cabling predictable and more cost-efficient

AutorHIS TechnologyTehnički članak

Anyone planning large solar projects knows that DC cabling has a decisive influence on project costs, construction time and long-term plant quality. With HISkon+, HIS Technology has developed a pre-assembled plug-and-play cable harness system that addresses exactly this. One cost factor remains, however: copper. This applies to conventional cables as well as to pre-assembled systems. HIS Technology's answer is HISkon+ ALU, a hybrid DC architecture for large PV plants. It combines copper and aluminium cables via certified copper-aluminium transition technology and reduces DC cabling costs by up to 35 %. EPCs thus receive more predictable quotes, and investors a more reliable basis for calculation.

Copper as a costing risk

Copper is a global commodity – and one of the most volatile. Demand from e-mobility, geopolitical supply chain disruptions and speculative movements drive the price in directions that no EPC or investor can control. Between April and October 2026 alone, the price on the London Metal Exchange rose from around 12,150 to around 14,750 USD per tonne (Westmetall, LME copper prices).


For large PV projects, this is a structural problem. DC cabling accounts for a considerable share of material costs in utility-scale plants. Anyone who calculates on the basis of one copper price and purchases months later carries this risk directly into the project calculation – and thus into the return.

The solution: HISkon+ ALU as a hybrid architecture

HISkon+ ALU addresses this problem with a new cabling architecture that makes targeted use of aluminium.


Copper and aluminium differ in weight, conductivity, cost and processing. Aluminium is lighter and structurally cheaper, but requires a larger cross-section and special connection technology for comparable current-carrying capacity. Which material is the right one therefore depends on the string, cable length and project budget.


The system combines proven copper string cables with an aluminium DC collecting cable, connected by certified Cu-Al transition technology that is crimped and tested at the factory under controlled conditions.

Schema eines Solarkabel-Verbindungssystems: Ein Kupferkabel (HIKRA SOL Cu, 4, 6 oder 10 mm²) mit Steckverbindern (HIS CU) verbindet über HIS-ALU-Steckverbinder ein Aluminiumkabel (HIKRA SOL-ALU, HIKRA SOL Al, 6, 10 oder 16 mm²) in der Mitte. Beide Enden sind mit roten Solarkabeln HIKRA 1500 SOL/TECH abgeschlossen.

The result is an overall system designed to EN 50618 and IEC 62930, covering system voltages up to 1,500 V DC and operating temperatures from –40 to +85 °C, with an expected service life of 25 years.

Like all HISkon+ products, HISkon+ ALU is assembled to the exact length at the factory, tested and fitted with connectors. The cables are ready to install, labelled for each project and compatible with Trina TS4, Amphenol H4 and Stäubli MC4-Evo 2. They are delivered in line with construction progress. This largely eliminates cutting, assembling and crimping on the construction site.

Tehnički list HISkon+ ALU
Tehnički list

Cost levers and savings potential of HISkon+ ALU

By using aluminium, the copper content of HISkon+ ALU is reduced to a minimum. This makes projects less dependent on raw material prices, and the costs of solar cables and connectors fall by approx. 20 to 25 % compared with traditional cabling.


In addition, pre-assembly saves the costs that would otherwise arise during installation on site. As with HISkon+, this effect of around 35 % results from factory production and delivery in line with construction progress. Work on the construction site is thus largely eliminated.

Pre-assembly also prevents hidden costs that can arise with conventional cabling due to crimping errors, delays and inefficient use of personnel. Overall, this results in cost savings of up to 35 % for the entire project compared with traditional cabling.

Vergleich der Kosteneinsparungen bei Solarkabelverlegung: Die herkömmliche manuelle Verlegung hat versteckte Kosten von 20 %. Das vormontierte System HISkon+ senkt die versteckten Kosten auf etwa 0 %, die Installation vor Ort um 35 % und die Kosten für Solarkabel und Steckverbinder um 5 %, was etwa 20 % Ersparnis bringt. Das vormontierte System HISkon+ ALU entfallen ebenfalls versteckte Kosten, bei der Installation vor Ort spart es 35 % und bei Kabeln und Steckverbindern 20 % gegenüber HISkon+, insgesamt etwa 35 % Ersparnis.
Schwimmende Solaranlagen auf einem See
Floating PV: where weight becomes a system issue


With floating PV systems, another advantage comes into play: weight. Aluminium is significantly lighter than copper. In projects with cable quantities in the kilometre range, the weight reduction of the collecting cable has a direct impact on the dimensioning of the floating structures.

This makes HISkon+ ALU suitable for floating PV applications. The components are designed for the water environment: IP68 protection rating, UV resistance, watertightness and testing according to TÜV 2 PfG 2750, the test standard for floating PV applications.

A reference project shows what this looks like in practice. At Philippsee in Bad Schönborn, O&L Nexentury, together with Kieswerk Philipp & Co KG, has realised a 15 MW floating PV plant with around 27,000 modules. The plant went into operation in 2024 and, according to the operator, was Germany's largest of its kind at the time of its inauguration. HIS supplied the pre-assembled cable systems and was involved in the planning at an early stage to accelerate installation on the water. Accompanying environmental monitoring also shows that a new habitat is emerging on the water surface.

HIS Technology as engineering partner for the entire DC side

From CAD planning, material selection and project-specific assembly to ready-to-install delivery in line with construction progress, we match every component to the overall system. EPCs thus receive a single point of contact for the DC side, less coordination effort and greater project security. Investors get a cost basis from a single source that can be calculated transparently from planning to delivery.

Große PV-Freiflächenanlage in einer Luftaufnahme
Solutions for utility-scale projects

We know the challenges of utility-scale PV plants and develop project-specific complete solutions from components for greater profitability and operational safety

Learn more
Mitarbeitender mit Steckverbindern von konfektionierten Kabelbäumen in der Hand
Pre-assembled cable harnesses

Factory-assembled and delivered ready for installation: HISkon+ shortens installation time and reduces the costs of your PV cabling.

Learn more

The right variant for every project

However, aluminium is not the right choice for every project. The cost advantage unfolds with large cable quantities and long collecting cables, typically in utility-scale and floating PV projects. For medium-sized ground-mounted plants with a manageable amount of cable, or for rooftop systems and smaller C&I projects with short string runs, the effort for the Cu-Al transitions often does not pay off. There, HISkon+ in the copper variant is the right solution. It offers the advantages of pre-assembly in terms of installation time and crimp quality, without any aluminium content.


Which variant suits a specific project depends on factors such as cable quantity, cable lengths, location and material prices. We evaluate these factors together with your planning team in an individual project consultation. Based on the specific cable plan, an analysis is created that compares the variants and discloses all assumptions. This allows you to base your decision on your own figures.

Oliver Glenz

Have the savings for your project calculated now! Send us your cable plan and we will prepare a tailor-made savings analysis for your next project.

Enquire about a project
Oliver Glenz – Rukovodilac prodaje i odjela

Slični članci

Oslonite se na sigurnost kada je riječ o zaštiti od požara

Izreka „sigurnost je na prvom mjestu“ zasigurno ima veliki značaj u mnogim područjima života. Svako pritom misli na različite teme: finansijske, privatne, poslovne. Jedan aspekt koji se tiče svih nas jeste zaštita od požara. Upravo kod javnih objekata kao što su bolnice, ustanove za njegu ili obdaništa, ovaj nivo sigurnosti u slučaju požara je posebno visok.

Saznajte više

Solarni kabl: efikasno ožičavanje za PV postrojenja

Efikasno korištenje obnovljivih izvora energije, posebno solarne energije, centralni je dio moderne energetske tranzicije. U srcu svakog solarnog postrojenja nalazi se ključna komponenta koja se često previdi: solarni kabl, posebno solarni kabl 6mm2.

Saznajte više
Vorkonfektionierte DC Kabelbäume an einem Gestänge

Predkonfekcionirani kabelski snopovi vs. konfekcija na licu mjesta

Vrijeme je novac – ta stara mudrost važi posebno pri montaži solarnih elektrana. Kabliranje pri tome predstavlja kritičan faktor troškova koji se često potcjenjuje. Ali upravo tu leži znatan potencijal ušteda: do 20 % ukupnih troškova može se uštedjeti primjenom predkonfekcioniranih kabelskih snopova. Kako je to moguće?

Saznajte više
PV-Anlage in einer trockenen, warmen Wüstenregion

Termička i mehanička izdržljivost solarnih kablova u pustinjskim regijama

Zahtjevi koji se postavljaju pred solarne kablove u pustinjskim regijama su ekstremni: Temperature preko 60°C, intenzivno UV zračenje, pijesak i velike temperaturne oscilacije postavljaju najviše zahtjeve pred korištene materijale. U našim laboratorijskim studijama ispitali smo kako ovi ekstremni uslovi utiču na dugoročnu otpornost solarnih kablova i koja tehnička rješenja pružaju optimalnu zaštitu.

Saznajte više

MC4 konektori: Kvalitet je presudan za sigurnost solarnih postrojenja

Mali su, neupadljivi, a ipak presudni za pouzdanost svakog fotonaponskog postrojenja: MC4 konektori. Kao standardizovano sučelje između solarnih modula, invertera i drugih komponenti, igraju ključnu ulogu u sigurnosti i dugovječnosti solarnih instalacija. Ali šta čini zaista dobar konektor?

Saznajte više
Monitoring Platine in einem Generatoranschlusskasten

Smart monitoring u priključnim kutijama generatora

Rano prepoznavanje problema, optimizacija prinosa i smanjenje troškova održavanja – inteligentni priključni ormari generatora (GAK-ovi) razvijaju se od jednostavnog zaštitnog uređaja u digitalnu komandnu centralu modernih PV postrojenja. Razvoj koji iz temelja mijenja monitoring solarnih parkova.

Saznajte više

Dimenzionisanje priključnih kutija generatora

U planiranju velikih PV instalacija pravilno dimenzionisanje priključnih kutija generatora (GAK) predstavlja centralnu odluku. Dok standardna rješenja za mnoge primjene dostaju, složeni projekti često zahtijevaju konfiguracije po mjeri. Umijeće je u tome da se prepozna kada je koji pristup pravi.

Saznajte više

Kabelska rješenja po mjeri: ključ efikasnosti PV instalacija

U raspravama o efikasnim solarnim elektranama u fokusu su najčešće moduli i inverteri. Pritom o učinku i dugovječnosti cijelog postrojenja presudno odlučuje često potcijenjen faktor: kvalitet i dimenzioniranje ožičenja. Posebno kod velikih projekata kablovska rješenja po mjeri mogu napraviti ključnu razliku.

Saznajte više
Schwimmende Solaranlagen auf einem See

Floating PV: specijalna rješenja kabliranja

Kako je moguće proširiti solarne kapacitete kada su kopnene površine ograničene? Dok su fotonaponski (PV) sistemi na kopnu već široko rasprostranjeni, nova tehnologija nudi dodatni potencijal: solarni sistemi na vodenim površinama.

Saznajte više